Famco Chimney Cleaning & Sweep Nationwide

Famco Chimney Cleaning & Sweep in Annapolis: What to Know First

We clean and sweep chimneys in Famco fireplaces and stoves throughout Annapolis, and most jobs are done in a single visit. A standard Famco chimney cleaning runs $189 to $289, with a Level 2 camera inspection included on every job. You’ll get a written price before we start, not after we’re already in your living room. If you own a Famco unit in Annapolis and you haven’t had the flue swept in the last year, call (443) 274-4231 and we’ll get you on the schedule.

Call (443) 274-4231

This page is for homeowners in Annapolis who own a Famco fireplace, insert, or freestanding stove and want to know exactly what a cleaning involves, what it costs, and what we look for when we’re inside. We’re an independent Famco service provider, which means we work on these units every season but we don’t answer to the manufacturer. We answer to you and to what the camera shows us.

Key takeaways:

• Famco chimney sweep in Annapolis: $189-$289 for a standard cleaning, written quote before work starts
• Level 2 camera inspection included on every visit, with a photo record you keep
• Most Famco cleanings are completed same-visit; liner or repair findings get documented with photos
• We’re independent, not authorized by Famco, so we recommend what’s actually needed, not what a warranty script says

How Famco Products Fail - and How We Fix Them

Famco makes solid, mid-range hearth products, but every line has patterns we see repeat across Annapolis homes. Here’s what actually shows up when the camera goes down a Famco flue:

• Famco stainless steel chimney liners and caps: salt air corrosion. In Annapolis neighborhoods near the water like Eastport, Hillsmere, and Annapolis Roads, we see Famco stainless caps and liners pitting faster than inland units. The salt in the air settles on the cap and sits there through humid summers. That corrosion doesn’t just look bad. It traps creosote and can compromise the draft. Our fix: remove the cap, inspect the liner top, replace with a Famco-compatible stainless cap when the metal’s thinned, and note the corrosion pattern in your photo record so you can track it.
• Famco prefabricated fireplace refractory panels: hairline cracking from rapid heating. Famco zero-clearance fireboxes, particularly the older pre-2015 models, use refractory panels that crack when the firebox heats quickly from cold. Annapolis winters are mild but damp, so homeowners light a fire in November after months of the unit sitting cold and humid, and the panel goes from 40 degrees to 400 degrees in fifteen minutes. Small cracks are cosmetic. Cracks wider than 1/8 inch or panels that have shifted are a fire safety issue. We repair what we can with refractory cement and recommend replacement when the panel has lost structural integrity.
• Famco wood stove door gaskets: fiberglass rope flattening. On Famco freestanding stoves, the door gasket rope flattens over 3 to 5 years of regular burning. When it flattens, the door doesn’t seal airtight, air leaks in, and the fire burns hotter and faster than designed. In a cleaning, we test the door seal with a dollar bill. If it slides out easily, the gasket needs replacement. We keep Famco-sized gaskets in common diameters on the truck, and it’s a 20-minute fix during a sweep, not a separate visit.
• Famco chimney caps with small mesh: spark arrestor clogging. Famco caps generally use a 3/4-inch mesh that’s effective at stopping sparks but catches creosote flakes from wood burning. In Annapolis, where many homeowners burn occasional fires rather than constant fires, creosote builds in that mesh and restricts draft before the flue itself gets dangerously coated. We clean the mesh on every sweep and note when replacement makes more sense than repeated cleaning.
• Famco fireplace glass: clouding from creosote and humidity. Famco units with ceramic glass fronts, especially inserts, develop a haze that doesn’t wipe off. It’s creosote that has baked on thin, combined with Annapolis humidity that keeps it sticky. Standard glass cleaner doesn’t touch it. We use a creosote-specific glass cleaner we keep stocked for Famco glass, and we don’t charge extra for it on a cleaning visit.

Our Famco Chimney Cleaning & Sweep Process

A Famco chimney cleaning in Annapolis follows the same sequence every time, because the sequence is what protects the house and the homeowner:

1. 1
   You call (443) 274-4231. A live person answers, takes your address and what you’re burning with, and gets you on the schedule. No phone tree.
2. 2
   We arrive with a named tech and a text before we show up. Background-checked, uniformed, and the truck carries Famco-compatible parts for common fixes. Your tech’s name is on the work order you get when we arrive.
3. 3
   We lay drop cloths and run the camera first. Clause 4 of the Haven Standard requires a photo record on every job, and we’ve worked that way since 2009. The camera goes down the flue before any brush comes out, so we know what we’re working with.
4. 4
   We sweep the flue with the right brush for your liner type. If it’s a Famco stainless liner, we use a poly brush, not wire. Wire scratches stainless and creates creosote grab points.
5. 5
   We clean the smoke chamber, firebox, glass, and check the cap and spark arrestor mesh. If we find something that needs attention, you see it on the camera screen before we discuss it.
6. 6
   You get the written report with photos, findings, and price before any work beyond the sweep starts. If it’s just a cleaning, the price was already written. If we found a liner crack or a failing panel, you’ll get a written scope and price, and you decide. No pressure.

Before

After

What Famco Chimney Cleaning & Sweep Costs in Annapolis

Here’s what you should expect to pay for Famco chimney cleaning and related work in Annapolis:

• Standard Famco chimney cleaning and sweep: $189-$289, depending on flue height, creosote classification, and accessibility
• Level 2 camera inspection (included on every visit, not an add-on): included
• Famco door gasket replacement (freestanding wood stoves): $45-$85 installed, most sizes
• Famco cap replacement with stainless steel: $165-$320, depending on cap size and liner type
• Refractory panel repair with cement: $120-$180; full panel replacement quoted per unit
• Creosote-specific glass treatment: no charge on a cleaning visit

What moves the price is mostly creosote classification. A Class I or Class II creosote is routine. Class III, the tar-like glazed stuff, takes longer to remove and requires chemical treatment plus mechanical removal, so it runs higher. Steep roof pitch or a chimney that’s hard to access adds a modest access charge. You’ll always get the exact price in writing before we start. Call (443) 274-4231 for a free estimate.

Why Annapolis Homeowners Call Level Two Chimney Annapolis for Famco Work

We’ve cleaned and inspected over 38,000 chimneys since 2009, and every single one got a written price before work started and a documented record when it was done. That’s not a marketing line. That’s Clause 1 and Clause 4 of the Haven Standard, and they’re stamped on every job. Corrine Halstead built this company on the principle that you deserve to see what we looked at, not just hear a verdict from someone who was on your roof for ten minutes.

If you have a written quote from another Annapolis chimney company, bring it to us. We’ll give you a free second opinion on it. And if the work we do isn’t right, the 365-Day Done Right Promise means we make it right, no fine-print dance. We also work across other major hearth brands like DuraFlex, HeatShield, and Gelco, so when a Famco liner isn’t the answer and the flue needs a different solution, we’re not stuck recommending whatever we happen to sell.

The camera doesn’t guess. Neither do I.

FAQs