Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterTrusted Chimney Liner & Rebuild for Annapolis Homeowners
Chimney liner and rebuild work in Annapolis typically runs $1,800 to $14,000 depending on whether you need a stainless steel liner dropped into an existing flue or a full masonry rebuild from the roofline up. Most liner replacements are done in a single day; a partial rebuild runs two to three days, and a full rebuild can take a week or more. We’ve been doing this work since 2009 under the Haven Standard, and every job starts with a camera scan so you see exactly what’s failing before you spend a dollar. Call (443) 274-4231 and we’ll schedule the inspection, put the findings in writing, and price the work before you commit to anything.
What Our Chimney Liner & Rebuild Service Includes
This is where we walk you through our Chimney Liner & Rebuild in Annapolis. The unifying rule is the same on all of them: no recommendation without camera evidence, and no work without a written price. Here’s what each one actually means.
Stainless Steel Liner
A stainless steel liner is a rigid or flexible metal tube installed inside your existing flue to contain heat, sparks, and combustion gases. You need one when the original clay tile liner is cracked, spalled, or missing sections, which the camera shows us directly. We source our stainless liners from Copperfield and DuraFlex, and every installation is sized to the appliance venting into it plus documented with before-and-after photos under Clause 4 of the Haven Standard.
Flexible Liner
Flexible liners are the standard solution when your flue has offsets or bends that a rigid liner can’t navigate without opening the masonry. They’re usually the lower-cost option for an existing fireplace or furnace flue, but they’re not right for every appliance, and we’ll tell you plainly when a rigid liner is the better call. We’ve installed flexible liners from DuraFlex and Copperfield in hundreds of Annapolis chimneys, and the written quote always specifies the exact gauge, alloy, and insulation method.
Liner Replacement
Liner replacement means pulling the old clay tile sections or a failed metal liner and installing a new one, usually the same day. In Annapolis we regularly replace liners that have been eaten by years of flue gas condensation, which is a slower, wetter failure than a chimney fire but just as dangerous. The replacement is sized to the current appliance and local code, and the photo record you receive shows the old liner out and the new one seated all the way to the top.
Partial Rebuild
When freeze-thaw cycles in Annapolis winters have spalled the brick above the roofline, or the crown is cracked and the top three to five courses are loose, a partial rebuild fixes that section without tearing down the whole chimney. We remove the damaged brick, re-lay it with the right mortar for our marine climate, and replace the crown and cap as part of the scope. The written quote tells you exactly how many courses we’re rebuilding and why the camera doesn’t show damage below that line.
Full Chimney Rebuild
A full rebuild is what it sounds like: the chimney comes down to the roofline or below, and we build it back. You’d need this when the structural brick has failed through the full height, the lintel over the fireplace is compromised, or a chimney fire has cracked the masonry all the way down. This is multi-day work, and the price reflects the scaffolding, the brick match, the liner install, and the roof flashing, all itemized in writing before we start.
Liner Repair
Liner repair covers smaller fixes: a section of clay tile that’s shifted out of alignment, a cracked crown letting water down around the liner, or joints between tiles that have opened up. In many cases we can use a resurfacing product like HeatShield to seal the existing flue instead of full replacement, which keeps the cost down without cutting corners. We’ll tell you honestly when a repair buys you another ten years and when replacement is the only safe move.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Chimney Liner & Rebuild
We install liners from Copperfield and DuraFlex on a regular basis, and we’re familiar with the engineering specs for each product line: wall thickness, alloy grade, insulation requirements, and what the installation manual actually requires versus what gets skipped in the field. When you choose a stainless liner, the written scope names the exact product and gauge, so you’re not getting a generic “stainless steel liner” that could mean anything.
For liner repair and resurfacing, we use HeatShield and Gelco products, both of which we’ve worked with long enough to know their limits and their right applications. Whether you have an existing Copperfield liner that’s failed, a DuraFlex install from another company that needs attention, or an old clay tile flue that needs any of these solutions, we’ll inspect it, show you the camera footage, and write the scope in plain English.
BeforeAfterSigns You Need Chimney Liner & Rebuild Right Now
- Crumbling clay tile at the cleanout or on the roof. If you find terra cotta-colored fragments in your firebox or at the base of the chimney, the liner is actively breaking apart. That means gaps are opening in the flue wall, and those gaps are where heat and gases reach combustible materials around the chimney.
- White staining or efflorescence on exterior brick. Water is getting into the masonry through a failed crown or spalled brick. In Annapolis, where winter freeze-thaw cycles are routine, trapped water expands and breaks the chimney apart from the inside. Efflorescence is the visible symptom of that water damage.
- A chimney fire has happened, even a small one. Any chimney fire, even the kind that sounds like a freight train for ten seconds and then stops, can crack the flue liner. The only way to know is a camera scan, and running another fire without that scan is not a risk we’d take ourselves.
- Smoke backing up into the house or a new gas appliance venting into an old unlined flue. A liner that’s too large, too small, or compromised won’t draft correctly, and that’s how carbon monoxide ends up in living spaces. This is the can’t-wait symptom.
- Loose or missing brick above the roofline. If you can see brick that’s shifted, or worse, missing, the top of the chimney is failing. This is the classic trigger for a partial rebuild in Annapolis, and the longer it sits through another winter, the more courses you’ll be paying to rebuild.
Our Chimney Liner & Rebuild Process - Step by Step
We follow the same five steps on every liner and rebuild job in Annapolis because the process is the product. Here’s what happens from the first call to the final photo record.
- 1
Camera-scan inspection (NFPA 211 Level 2). We run a camera down the flue and show you what we see on the spot. This is the inspection we’ve done by default since 2009, not an upsell. You’ll see the cracks, the gaps, and the spalled sections with your own eyes.
- 2
Written scope, written price, written warranty. Before any work starts, you get a document that names the liner product and gauge, the exact courses being rebuilt, the mortar type, the timeline, and the dollar figure. Clause 1 of the Haven Standard: have it in writing. If it’s not in writing, it didn’t happen.
- 3
Scheduling and named technician. You’ll know who’s coming before they arrive, and they’ll be background-checked, uniformed, and licensed. We text when we’re on the way. The person you’ll be emailing or talking to is also the person who’ll be on your roof.
- 4
The work itself. We tear out only what needs to come out, protect your roof and yard, and keep the site clean at the end of each day on multi-day rebuilds. The liner or masonry work goes in per manufacturer spec, not per “that’s how we’ve always done it.”
- 5
Documented photo record and final walkthrough. You get photos of the installed liner top and bottom, the rebuilt sections, the crown, and the cap. Clause 4 of the Haven Standard has required this on every job since 2009. If something isn’t right, the 365-Day Done Right Promise means we make it right, and the photo record is what holds us to it.
How Much Does Chimney Liner & Rebuild Cost in Annapolis?
A Chimney Liner & Rebuild - Arnold equivalent typically runs $1,800 to $4,800 for a single-flue chimney, depending on liner length, insulation requirements, and whether scaffolding is needed. Liner repair or resurfacing with HeatShield lands between $1,200 and $3,000. Partial rebuilds range from $3,500 to $8,000 based on how many courses are coming out and what’s happening with the crown. Full chimney rebuilds start around $9,000 and can reach $14,000 or more when we’re rebuilding from below the roofline with full scaffolding, brick matching, and new flashing. Here’s the breakdown by common scenario:
- Stainless steel liner, single flue, straight run: $1,800-$3,200
- Flexible liner, offset or multi-story flue: $2,200-$4,800
- HeatShield resurfacing or targeted liner repair: $1,200-$3,000
- Partial rebuild, top 3-8 courses plus crown: $3,500-$8,000
- Full chimney rebuild from roofline: $9,000-$14,000+
What moves the price: liner length and diameter, insulation needs for an exterior chimney, how much of the brick is actually failing, access (steep roofs, zero lot lines, historic district requirements in downtown Annapolis), and whether a permit inspection is involved. The way to avoid overpaying is to get the camera record and a written price, then bring us a competitor’s written quote for a free second opinion. That comparison only works when both are in writing. Every estimate we give is free, itemized, and valid in writing before you say yes.
Chimney Liner & Rebuild Near Annapolis - Our Service Area
We handle liner and rebuild work throughout Anne Arundel County and into the surrounding area: Parole, Arnold, Severna Park, Lake Shore, Crofton, Odenton, Pasadena, Riviera Beach, Glen Burnie, and Severn. Most inspections are scheduled within a few days, and rebuild work is booked around weather windows, especially in spring and fall when Annapolis conditions are best for masonry. If you’re in one of these areas, you’re in our standard service radius with no trip charge surprise. Check our home page for the full scope of what we do across the region.
Serving Annapolis, MD - Our Local Coverage Area
We’re based in the Annapolis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Chimney Liner & Rebuild in Annapolis
Chimney liner and rebuild is the work of repairing or replacing the flue liner that contains heat and gases, plus rebuilding the masonry structure when brick, mortar, and crown have failed. The liner is what protects your house from chimney fire and carbon monoxide, and the rebuild is what keeps the whole chimney standing. We do both in Annapolis with camera documentation before and after.
Most liner installations are done in a single day, including setup and cleanup. A partial rebuild usually takes two to three days depending on how many courses are involved. A full rebuild can run a week or more when we’re working from scaffolding and matching historic brick in older Annapolis neighborhoods. Call (443) 274-4231 and we’ll give you a straight timeline in the written scope.
Our Chimney Liner & Rebuild in Severna Park uses the same pricing: liners run $1,800 to $4,800 for a standard install, liner repair runs $1,200 to $3,000, and rebuilds run $3,500 to $14,000+ depending on the scope. The only way to get a real number for your chimney is a camera inspection, which shows us exactly what’s failing and what doesn’t need to be touched. Estimates are free and always in writing before you commit.
Yes, we work with Copperfield and DuraFlex liners routinely, and we know their installation specs and failure modes. If another company installed a liner from either brand and it’s not drafting or it’s failed, we’ll inspect it with the camera and tell you what’s wrong. Our quote will name the exact replacement product, gauge, and insulation method.
Sometimes it is and sometimes it isn’t. A cracked liner with no active fireplace use can often wait a few weeks while you get quotes. A liner venting a gas furnace or water heater that’s showing signs of backdrafting is an immediate carbon monoxide risk, and you should stop using the appliance and call us right away. We answer the phone live, 24/7, so you’ll talk to a person, not a voicemail.
Every job carries the 365-Day Done Right Promise: if it’s not done right, we make it right. The specific warranty on your liner or rebuild is in writing in your scope before work starts, along with the manufacturer’s warranty on the liner product itself. We don’t do verbal warranty promises, because a spoken warranty isn’t worth anything.
Clear the area around the fireplace if the work is interior, and keep pets inside on the day of the work. If we’re on the roof, you don’t need to do anything except know we’ll be there. Your technician will text you when they’re on the way, and the written scope you receive beforehand will flag anything we need from you in advance. Most appointments require no prep at all.
Schedule Your Chimney Liner & Rebuild Service in Annapolis Today
If you’re seeing any of the warning signs above, or if you bought your Annapolis home and never had the flue camera-scanned, now is the time to find out what’s actually in there. Call (443) 274-4231 for a free estimate and a written price before any work starts. We answer live, 24/7, and the inspection comes with photos you keep. Corrine Halstead leads our Annapolis team, and the standard we work to has been the same since 2009: show you the evidence, write it down, and do it right.
Written by Corrine Halstead, Owner at Level Two Chimney Annapolis, serving Annapolis and Anne Arundel County since 2009.