Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Fireplace Services in Annapolis: What to Know First
We service Olympia Chimney fireplaces throughout Annapolis as an independent provider, not a manufacturer-authorized shop. Most Olympia fireplace repairs we handle turn around in one visit, with a written price before any tool comes off the truck. A standard service call in Annapolis runs $129-$189, and if the fix is straightforward, the total stays under $350. This page is for homeowners who own an Olympia Chimney unit and want to know what’s actually wrong with it, what it costs, and whether it’s worth fixing. Call (443) 274-4231 and Corrine Halstead’s crew will get you on the schedule.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Vent-Free Gas Logs: thermocouple drift and carbon buildup. The Olympia vent-free log sets we see in Annapolis basements and converted dens tend to develop weak pilot signals after two to three seasons. The symptom is a fire that lights and then drops out fifteen minutes later. It’s almost always a carboned-up thermocouple, not a failed valve. We clean the assembly, test the millivolt reading, and replace the thermocouple with an OEM-spec part before recommending anything more expensive.
- Olympia Wood-Burning Fireplace Doors: warped gasket channels on the Avalon series. The Avalon line’s door frames are cast aluminum, and after about eight years of Annapolis humidity cycles, the gasket channel can lose its flat seat. The result is a door that won’t seal tight, which drags smoke back into the room on windy days. We machine the channel back to tolerance or replace the frame insert, then fit a fresh graphite-impregnated gasket cut to the exact width Olympia specified, not a generic rope.
- Olympia Zero-Clearance Fireplace: refractory panel stress cracks at the rear wall. The zero-clearance models we work on in older Annapolis townhouses often crack their rear refractory panel along the seam lines. This isn’t a house-fire risk by itself, but once the panel shifts, the firebox frame gets direct heat. We pull the old panel, check the frame for warping, and either re-seat the panel with the correct refractory cement or order a replacement panel that matches the unit’s original thickness, not a thinner aftermarket slab.
- Olympia B-Vent Gas Fireplaces: flue condensation causing white staining on the firebox floor. In Annapolis, where fall mornings run damp before the evening burn, Olympia B-vent units run a cooler flue and condense more acidic moisture than they would in a drier climate. The tell is a white chalky film below the burner. Left alone, it eats the burner ports. We brush it down, inspect the port pattern, and confirm the vent run pitch matches the original installation spec before we call it done.
- Olympia Damper Assemblies: rusted pivot pins on the Olympic front-mount dampers. The Olympic series uses a front-mounted lever with steel pivot pins. The Annapolis salt air, especially in Eastport and Murray Hill homes near the water, rusts those pins faster than the manufacturer’s maintenance guide assumes. You’ll know because the lever binds on the edge of the frame. We replace the pins with stainless equivalents, not the stock plated steel, and test the full throw before the bill is written.
Our Olympia Chimney Fireplace Services Process
- 1
The call. You reach a live person at (443) 274-4231, tell us what the fireplace is doing, and we give you an arrival window. No web form, no voicemail tag.
- 2
Named tech, timed arrival. Your assigned technician texts you when they’re on the way, in uniform and with a background check already on file. You’ll know their name before they ring the bell.
- 3
Camera and diagnostic. The tech runs a camera down the flue and through the firebox on every Olympia job, even simple cleanings. Clause 4 of the Haven Standard requires it. You see the footage on their monitor and you get the photos when the job closes out.
- 4
Written price before any work. If the camera turns up a cracked panel, a worn damper pivot, or a gas valve reading outside spec, the tech writes you a flat price with the scope spelled out. Clause 1 of the Haven Standard: no work starts until you see a written number.
- 5
The repair. We use parts that match Olympia’s original spec where it matters for safety and warranty: refractory panels in the original thickness, gaskets cut to the measured channel width, millivolt parts from OEM-equivalent suppliers. If an aftermarket part works as well, we tell you and price it lower.
- 6
Test, photo, guarantee. The fireplace gets fired and run until it behaves. You get the documented photo record and a written warranty. The 365-Day Done Right Promise stays in effect for a full year.
BeforeAfterWhat Olympia Chimney Fireplace Services Costs in Annapolis
Service call and diagnostic on an Olympia fireplace in Annapolis is $129-$189, applied toward the repair if you approve the work same day. The repair itself is where the price branches.
- Cleaning and safety check (no repairs): $189-$249
- Thermocouple or pilot assembly replacement on a vent-free or B-vent unit: $240-$340
- Refractory panel replacement on a zero-clearance firebox: $380-$650 depending on panel size and whether the frame needs re-seating
- Damper pivot pin rebuild with stainless replacements: $160-$280
- Full gasket channel machine-work and re-gasketing on Avalon doors: $320-$460
What moves the price is parts availability. Olympia parts channels run slower than DuraFlex flex-liner stock, and if your serial number sits in a discontinued run, we quote a custom-fabricated equivalent before you pay anything. Estimates are free. Call (443) 274-4231 for the exact price on your unit.
Why Annapolis Homeowners Call Level Two Chimney Annapolis for Olympia Chimney Work
Because the camera doesn’t guess. Neither do we. Corrine Halstead’s crew has been running a camera down the flue before touching anything since 2009, and that’s how an Olympia chimney job works here too: see it, write it, price it, fix it. Every one of our 38,000-plus inspections left with a written price and a photo record, not a verbal summary. If you hold a written estimate from another Annapolis shop, bring it in and we’ll do a free second opinion on the scope. And when the Olympia part isn’t the right call, we carry DuraFlex, HeatShield, and Gelco materials sourced through Haven’s buying network so the honest fix gets priced honestly, not through a brand markup.
FAQs
We don’t administer Olympia’s manufacturer warranty, since we’re an independent service provider, but a documented photo record from every visit gives you exactly what you need to file a claim. Our own work carries the 365-Day Done Right Promise: if it’s not right, we make it right. Call (443) 274-4231 before you assume a repair is out of pocket.
Most common parts, thermocouples, gaskets, damper pivot pins, we stock or source within two to four business days. Discontinued serial runs from Olympia sometimes take a week or more, and we tell you that before you approve anything. No job waits on a mystery ETA. Call (443) 274-4231 and we’ll check parts availability while you’re on the phone.
If the firebox frame isn’t warped and the gas valve reads healthy, an Olympia repairs for $250-$650 and runs another five to eight seasons. The replace-it conversation only starts when the frame has moved from heat stress, because everything else is a mechanical part. We’ll show you the camera footage that backs up the recommendation. Call (443) 274-4231 for a straight answer.
Yes, and a fireplace nobody has burned in four years is rarely in better shape for the rest. Annapolis humidity sends rust through damper pins and weakens refractory panels even when the firebox stays cold. We camera it, clean it, and tell you whether the first fire would have been your last before the repair. Call (443) 274-4231 and we’ll schedule it.
Written by Corrine Halstead, Owner, Level Two Chimney Annapolis at Level Two Chimney Annapolis, serving Annapolis and nearby areas.